Krones installs first PET recycling line on German soil
A Krones spokeswoman told this publication that the line for own-label beverage and food producer St…A Krones spokeswoman told this publication that the line for own-label beverage and food producer Stute Nahrungsmittelwerke – which will be installed in August – was capable of producing 500kg of rPET flakes per hours.
The SuperClean-PET-Flake process was able to produce flakes with a high degree of purity for use in new PET bottles, Krones claimed, and simplified the process by cutting-out additional steps demanded by conventional processes.
“With this process, Stute [which runs 13 PET lines and is moving away from carton packaging] plans to feed both PET bottles and preforms back into its bottle production operation. This also includes bottles that have already come into contact with the product.
“The recycling process washes and decontaminates the rejected PET, thus guaranteeing its suitability for future food-grade operations.”
Simplified flake production
Krones PET materials were first fed into a washing module, where label residues, glue, soluble dirt and sand were removed: bottles are ground and flakes pre-washed, with PET separated from lighter PO lid materials, dried and sorted by colour.
Flakes were then heated up in a decontamination module to what Krones calls the ‘final decontamination temperature’, significantly below the melting point of PET (allowing for energy savings versus pellet production processes).
A two-stage process ending in vacuum cleaning to get food-grade flakes was more efficient that standard PET recycling processes, Krones claimed.
“Stute wanted to create a sustainable, closed-circuit process within its own production facility right from the start.
“And of course, the sector is still living under the Damoclean sword of a politically inspired additional deposit on non-returnable PET. This extra burden may be evade only by a relatively high proportion of recyclate, as the PETCycle system goes to show.”
First lines in Bangladesh, Japan
The spokeswoman sent us company publications showing that the company built one of its first bottle-to-bottle PET recycling lines in Bangladesh, for Akij Food & Beverage in 2009.
Krones also noted that client FP Corporation had been operating a similar line since the beginning of 2011, and ordered a second line later that year.
The Hiroshima firm produces disposable food trays made of polystyrene, and uses PET for a film over the trays.
